How to open Sonim XP5700 in Dev Mode? Step By Step Guide
Some important methods to open developer option in Sonim XP8 are given below:
1. First, make sure your device is on by holding down the Power button for a few seconds.
2. Next, go to the Main Menu, Open the Settings, then scroll down and select at the end “About phone”.
3. To erase everything on your SONIM XP8,You’ll need to do a factory reset.
4. Go to Settings, scroll down to “About phone,” and tap “Build number” seven times to unlock the Developer Options.
5. Now you can reset your phone and activate Developer Options.
And that’s it! You’ve just turned on Developer Options.

How to put sonim xp5700 in dev mode android
Here’s a more natural version:
If you’re using a Sonim XP5 or XP5s (which don’t have a touchscreen), you can still open Developer Options like this:
1. Open the phone dialer and dial: ##2387##.
2. This will bring up the Developer Options menu.
3. Make sure USB Debugging and Take Bug Report are both turned on.
4. You can also add a quick shortcut to the Power menu for easier access next time.
For other Sonim devices with a touchscreen, you can just go to the settings menu to open Developer Options. You can check learn about Editor Benjamin Tech Guru Keezy.co from tech door.
How to reset sonim xp5 with adb and fastboot
Here’s how you can reset your Sonim XP5 using ADB and Fastboot in simple, everyday language:
1. Turn on USB Debugging:
Go to Settings > About Phone > Software Information.
Tap on “Build Number” several times until a message appears saying, “Developer options are now enabled.”
Next, go to “Developer options” in your settings and enable “USB debugging.”
2. Connect Your Phone to the Computer:
Use a USB cable to connect your Sonim XP5 to your computer.
3. Open Command Prompt:
On your computer, open Open the Command Prompt, then go to the folder where you installed ADB. (usually something like C:\android-sdk\platform-tools).
4. Check If Your Phone Is Connected:
Go to the Command Prompt, type or enter the command we suggested above and press Enter.
“`
adb devices
“`
This will make sure your phone is properly connected.
5. Enter Fastboot Mode:
- Power off your Sonim XP5700.
- Press the Volume Down button for few seconds and the Power button at the same time.Keep holding both buttons until the Fastboot screen appears on your device.
6. Factory Reset Your Phone:
While your phone is in Fastboot mode, type this command into the Command Prompt and press Enter:
“`
fastboot -w
“`
This will reset your phone to factory settings. Make sure you have the correct drivers installed and ADB set up on your computer first. For Kingo Root for Sonim XP5700 with PC, USB Debug Mode Sonim Xp5700 or other techs you can click and understand it

Do I need a USB stick to enable developer mode?
No, you don’t need a USB stick to enable developer mode on most devices:
Conclusion
To enable Developer Options on the Sonim XP8, first turn on the device and go to Settings > About Phone. Go to your phone’s “Settings,” then tap on the “Build Number” seven times to open the Developer Options menu. Then, enable USB Debugging. For Sonim XP5 or XP5s, use the phone dialer to Dial ##2387## to access Developer Options, and ensure USB Debugging is enabled. To reset the Sonim XP5 using ADB and Fastboot, enable USB Debugging, connect the phone to your computer, open Command Prompt, enter fastboot mode, and type fastboot -w to perform a factory reset. No USB stick needed.